Product Details Portlet

XH5 Half-pitch SMT Connectors (Board to Board and Board to Cable Connectors)

SMT-compatible Connectors with a 1.27-mm Pitch

  • These SMT Connectors can be mounted on the back surfaces of circuit boards.
  • Circuit board positioning bosses provided for accurate mounting on circuit boards.
  • Compatible with reflow mounting.
  • Board-to-board stacking height of 8 to 18.5 mm with stacking connections.

Discontinuation Date: Jun. 30, 2018

RoHS適合
本ページは製品カタログからの抜粋した情報を記載しています。その他の製品情報はデータシート他各種データをご覧ください。

■XH5A/E Plug
Right-angle, SMT Pins

Number of contactsModelQuantity per reel (unit)

Right-angle, SMT Pins
12XH5A-1215560
26XH5A-2615
50XH5A-5015
68XH5A-6815
80XH5A-8015

Straight, SMT Pins

Number of contactsHeight (mm)ModelQuantity per reel (unit)

Straight, SMT Pins
126.75XH5E-1215-1280
8.25XH5E-1215-2
9.85XH5E-1215-3250
266.75XH5E-2615-1280
8.25XH5E-2615-2
9.85XH5E-2615-3250
506.75XH5E-5015-1280
8.25XH5E-5015-2
9.85XH5E-5015-3250
686.75XH5E-6815-1280
8.25XH5E-6815-2
9.85XH5E-6815-3250
806.75XH5E-8015-1280
8.25XH5E-8015-2
9.85XH5E-8015-3250

■XH5F/B Socket
Right-angle, SMT Pins

Number of contactsModelQuantity per reel (unit)

Right-angle, SMT Pins
12XH5F-1215560
26XH5F-2615
50XH5F-5015
68XH5F-6815
80XH5F-8015

Straight, SMT Pins

Number of contactsHeight (mm)ModelQuantity per reel (unit)

Straight, SMT Pins
126.25XH5B-1215-4280
9.05XH5B-1215-5
13.65XH5B-1215-6170
266.25XH5B-2615-4280
9.05XH5B-2615-5
13.65XH5B-2615-6170
506.25XH5B-5015-4280
9.05XH5B-5015-5
13.65XH5B-5015-6170
686.25XH5B-6815-4280
9.05XH5B-6815-5
13.65XH5B-6815-6170
806.25XH5B-8015-4280
9.05XH5B-8015-5
13.65XH5B-8015-6170

Cable with Connectors on Both Ends

Number of contactsLength (mm)ModelMinimum ordering
quantity (pieces)

Cable with Connectors on Both Ends
12100XH5H-1210-101
200XH5H-1210-20
300XH5H-1210-30
26100XH5H-2610-10
200XH5H-2610-20
300XH5H-2610-30
50100XH5H-5010-10
200XH5H-5010-20
300XH5H-5010-30
68100XH5H-6810-10
200XH5H-6810-20
300XH5H-6810-30
80100XH5H-8010-10
200XH5H-8010-20
300XH5H-8010-30
Rated current1A
Rated voltage100VAC
Contact resistance25mΩmax. (at 20 mVDC, 100 mA max.)
Insulation resistance1,000MΩmin. (at 500 VDC)
Withstand voltage500 VAC for 1 min (leakage current: 1 mA max.)
Insertion durability500 times
Operating temperature-55 to 105℃(with no condensation or icing)
(unit: mm)

XH5A-□□15
(Right-angle, SMT Pins)

Mounting Holes

(Tolerance: ±0.03)
Note: The overall pattern pitch tolerance for the board is ±0.03.Do not accumulate error.
The 1.6

 0

diameter holes are for the positioning bosses. Use metal masks to prevent solder from
-0.03
entering these holes.
Table of Dimensions
ModelNumber of contactsABCDEF
XH5A-12151212.709.578.576.3510.7710.37
XH5A-26152621.5918.4617.4615.2419.6619.26
XH5A-50155036.8333.7032.7030.4834.9034.5
XH5A-68156848.2645.1344.1341.9146.3345.93
XH5A-80158055.8852.7551.7549.5353.9553.55


XH5E-□□15-□
(Straight, SMT Pins)

Mounting Holes

(Tolerance: ±0.03)
Note: The overall pattern pitch tolerance for the board is ±0.03.Do not accumulate error.
The 1.6

 0

diameter holes are for the positioning bosses. Use metal masks to prevent solder from
-0.03
entering these holes.


Table of Dimensions
ModelNumber of contactsABCDEFGH
XH5E-1215-□1212.709.578.576.3510.7710.375.61: 6.75
2: 8.25
3: 9.85
XH5E-2615-□2621.5918.4617.4615.2419.6619.2617.0
XH5E-5015-□5036.8333.7032.7030.4834.9034.5017.0
XH5E-6815-□6848.2645.1344.1341.9146.3345.9317.0
XH5E-8015-□8055.8852.7551.7549.5353.9553.5517.0
Note: □ is replaced by 1 to 3 to indicate the connector height type.


XH5F-□□15
(Right-angle, SMT Pins)

Mounting Holes

(Tolerance: ±0.03)
Note: The overall pattern pitch tolerance for the board is ±0.03.Do not accumulate error.
The 1.6

 0

diameter holes are for the positioning bosses. Use metal masks to prevent solder from
-0.03
entering these holes.
Table of Dimensions
ModelNumber of contactsABCDE
XH5F-12151212.709.378.376.3510.77
XH5F-26152621.5918.2617.2615.2419.66
XH5F-50155036.8333.5032.5030.4834.90
XH5F-68156848.2644.9343.9341.9146.33
XH5F-80158055.8852.5551.5549.5353.95


XH5B-□□15-□
(Straight, SMT Pins)

Mounting Holes

(Tolerance: ±0.03)
Note: The overall pattern pitch tolerance for the board is ±0.03.Do not accumulate error.
The 1.6

 0

diameter holes are for the positioning bosses. Use metal masks to prevent solder from
-0.03
entering these holes.
Table of Dimensions
ModelNumber of contactsABCDEFG
XH5B-1215-□1212.709.378.376.3510.777.604: 6.25
5: 9.05
6: 13.65
XH5B-2615-□2621.5918.2617.2615.2419.6617.76
XH5B-5015-□5036.8333.5032.5030.4834.9017.76
XH5B-6815-□6848.2644.9343.9341.9146.3317.76
XH5B-8015-□8055.8852.5551.5549.5353.9517.76


XH5H-□□10-□□

Note: The figure shows Connectors with 12 pins.
Table of Dimensions
ModelNumber of contactsL
XH5H-1210-1012100
XH5H-1210-2012200
XH5H-1210-3012300
XH5H-2610-1026100
XH5H-2610-2026200
XH5H-2610-3026300
XH5H-5010-1050100
XH5H-5010-2050200
XH5H-5010-3050300
XH5H-6810-1068100
XH5H-6810-2068200
XH5H-6810-3068300
XH5H-8010-1080100
XH5H-8010-2080200
XH5H-8010-3080300

Precautions for Correct Use

Soldering Conditions

Recommended Reflow Conditions
Maximum temperature: 260℃
Time: Within 20 to 40 s

These conditions, however, depend on the type of solder, the manufacturer, the amount of solder, the size of the circuit board, and the other mounting materials. You must check and select the actual conditions.

Metal Mask Thickness for Cream Solder Printing

We recommend a metal mask thickness of 0.18 to 0.20mm for cream solder printing. These conditions, however, depend on the type of solder, the manufacturer, the amount of solder, the size of the circuit board, and the other mounting materials. You must check and select the actual conditions.

Pin Deformation

The pins will deform if you subject them to an excessive load. Deformed pins will reduce solderability when the Connectors are mounted. Do not drop the Connectors or handle them roughly. Do not connect or disconnect Connectors that are not mounted to a circuit board. Doing so may deform the pins.

Soldering in an Automatic Solder Bath after Reflow Soldering

To prevent the rise of flux, mask the circuit board positioning boss holes with tape before you perform automatic soldering. If you mount Connectors on the edges of the circuit boards, make sure that the solder surface does not come into contact with the Connectors and that flux does not adhere to contact surfaces.

Application Precautions


  • ・Confirm that there is no excessive misalignment or inclination in the mating contact portion between the plug and socket before mating the Connector. Make sure that the Connector is mated all the way to the back. If the Connector is not mated all the way to the back, contact reliability may be lost.
  • ・Do not apply an extreme load during Connector insertion or removal. The Connector may be damaged, and contact failure may result. Twist the plug and socket as little as possible when mating the Connector. Not doing so may deform the terminals or housing or crack the housing.
  • ・Do not insert a foreign object, such as tweezers, into the Connector mating contact portion. Doing so may cause the plating to peel off or deform the terminals.


Board Mounting Precautions

Be careful of board warping. Warping that is too severe may cause faulty soldering.

Storage

(1) Do not store the Connectors in locations subject to dust or high humidity.
(2) Do not store the Connectors in locations close to sources of gasses such ammonia gas or sulfide gas.